PIXEL POV 8-Bit Glove Set

80+ Stackable patterns

Full Alphabet + Numbers + = # ?

Visual programming menu

When programming Colors, Patterns…  it will spell out “Colors”, “Patterns” etc…

LED Lock with Double Click to turn on

Classic modifiers including Aurora, Bounce and Rainbow

EXPERT LEVEL GLOVING CHIPS

LIFETIME WARRANTY

Pixel Quick Start Guide

Conjure mode – While ON, click and hold on desired mode until the light displays BLUE, release before the loading bar changes to the next color, now you’re in 1 mode conjure.

LED Lock mode – While OFF, click and hold on until the light displays RED, release before the loading bar changes to the next color, now your light is LOCKED. Repeat this process to UNLOCK the light (this time it will display green so you know its unlocked)

WHILE LOCKED, a quick double click will turn your light on, and when its turned off again it will still be locked.

MODE MODIFICATION MENU – While ON, click and hold on until the light displays WHITE, release before the loading bar changes to the next color, you are now in the mode modification menu.

1. Color (Green)
2. Patterns 1 (Purple)
3. Patterns 2 (Blue)
4. Patterns 3 (Orange)
5. Modifiers (Red)
6. Strobe (Green)
7. EXIT

All of which can be entered by holding the button until the loading bar appears

Colors – up to 8 colors can be chosen per mode, after each color is selected it will display all colors you have selected on the LED bar. To finish and confirm selection, click and hold until the loading bar completes (while viewing your color selection)

Patterns – program in the same way colors do, there are 90+ patterns all can be combined, and up to 8 patterns per mode slot.

Patterns 1 – single color patterns

Patterns 2 – 2 color patterns

Patterns 3 – Alpha-numeric patterns

Modifiers – These modify the colors/way the current patterns are displayed. Click through and see what they do!

Strobe – This allows you to change the strobe timing of an individual mode, see below for timings.

GLOBAL SETTINGS MENU – While OFF, click and hold on until the light displays WHITE, release before the loading bar changes to the next color, you are now in the global settings menu. (note, you can NOT enter this menu if you’re in light lock, its a pocket safety feature)

Global Settings Menu has 3 sub menus

1. Strobe (Green)
2. Brightness (Blue)
3. Factory Reset (White)
4. EXIT

All of which can be entered by holding the button until the loading bar appears

Strobe Settings 1-4 are designed for Gloving speeds

Strobe Settings 5-6 are designed for Orbit speeds

Strobe Settings 7-8 are designed for Handles (coming soon)

Brightness settings 1-8 change the overall brightness of the LED’s 1 is low 8 is high

Factory Reset – This requires a LONG HOLD until the loading bar fully reaches 8 LED’s (this is to ensure no accidental resets)

ALL MENUS ARE VISUAL, YOU SHOULD BE ABLE TO SHAKE THE LIGHT AND READ WHAT YOU’RE CHANGING IF YOU FORGET YOUR MANUAL OR DON’T HAVE ONE HANDY. TRY SHIT OUT, THEY HAVE FACTORY RESET FOR A REASON <3

**Please note, these gloves are for expert-level use, if you are used to our Nano line of microlights they will take some getting used to (they are almost twice the size) but once you do, the trails are unbeatable!